Product name Swimsuit printing paste State Paste Packing 25KG/drum for white, 20KG/drum for clear Storage 6 months in cool place Application Suitable for swimsuit, lycra, sportswear Features 1. Extra elasticity 2. High fastness 3. SGS detecting passed, no PVC, no heavy metal, no NPEOs Mix proportion Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?% Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?% Printing process 1. Printing with clear printing paste for 1-2 times 2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly. 3. Printing again for 3-4 times (3-4 scrapes per time). 4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃ 5. Finish. Attentions 1. Please drying the paste surface with cold air each time before re-printing. 2. The pigment is max 12%, otherwise it’ll be easily faded. 3. 1-3% curing agent is suggested to make better washing ability. 品名 抗回粘特软弹性泳衣胶浆 外观 糊状 包装 白胶浆25KG/桶，透明浆20KG/桶 贮存期 常温下6个月 应用 泳衣布、尼龙布、毛衣和高弹性织布 卖点 1. 耐海水洗、漂洗、酸洗 2. 高弹性超柔软 3. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求 调配比例 印浅色：白胶浆70-80% + 透明浆20-30% + 固化剂3% + 色种？% 印深色：白胶浆20-30% + 透明浆70-80% + 固化剂3% + 色种？% 工艺流程 1. 丝网选用100-120目，用丝印硬方刀75度刮印, 以透明浆打底1-2次 2. 将白胶浆，透明浆，色种，固化剂搅拌匀印2-3次 3. 24-48小时自然干燥，或150-180度焙烘1-3分钟 注意事项 1. 加入固化剂的泳衣胶浆必须在4~8小时内用完
联系我时，请说是在找找去看到的，谢谢！